3" Insert Bearings UC215-48
UC215-48
UC215-48 Insert Bearing?has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring.
UC 215-48 Insert Bearing?is self-aligning for standard load capacity. This specific arrangement is suitable for application as where the direction of rotation is alternative.
The?UC200 Series Insert Bearing?are widely used as replacement bearings for Pillow Blocks, 2-Bolt Flanges, 3-Bolt Flanges, 4 Bolt Flanges, Take-Up Units, and many more. It can be costly to replace the whole unit however, buying just the replacement for the insert bearing can save you from over spending.?
UC215-48 Insert Bearing?has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring.
UC 215-48 Insert Bearing?is self-aligning for standard load capacity. This specific arrangement is suitable for application as where the direction of rotation is alternative.
The?UC200 Series Insert Bearing?are widely used as replacement bearings for Pillow Blocks, 2-Bolt Flanges, 3-Bolt Flanges, 4 Bolt Flanges, Take-Up Units, and many more. It can be costly to replace the whole unit however, buying just the replacement for the insert bearing can save you from over spending.?
UC 215-48 Dimensions
|
Unit |
Shaft Dia |
D |
Bi |
Be |
n |
m |
G |
ds |
|
inch |
3 |
5.1181 |
3.0630 |
1.1811 |
1.3110 |
1.7520 |
0.4724 |
7/16-20 UNF |
|
mm |
130 |
77.8 |
30 |
33.3 |
44.5 |
12 |
M12 X 1.5 |